What should a pilot do if the DJI Mavic 4 Pro unexpectedly enters Atti mode during flight?

[AdminForo]

What should a pilot do if the DJI Mavic 4 Pro unexpectedly enters Atti mode during flight: When the DJI Mavic 4 Pro enters Atti (Attitude) mode, the system disables GPS positioning and visual stabilization sensors, meaning the drone can no longer automatically maintain its position in the air. In this mode, the drone is more susceptible to wind and requires experienced pilots to manually maintain stable flight. This situation can occur due to loss of GPS signal or sensor interference.

In this scenario, the first thing a pilot should do is remain calm and take full control of the drone using the remote controller's sticks. In Atti mode, the drone does not remain stationary unless commands are given; it tends to drift due to inertia or wind. Therefore, it is crucial to carefully observe its direction and altitude, applying gentle corrections to avoid sudden movements or loss of control.

A key recommendation is to initiate a manual return-to-home maneuver, without relying on the automatic RTH button, which will not be available in Atti mode. If possible, the pilot should slightly elevate the drone to avoid obstacles and always maintain a direct line of sight, facilitating a safe landing in a clear area. Flying in areas with trees, buildings, or bodies of water should be avoided when in this mode.

Once landed, the cause of entering Atti mode should be reviewed. It could be due to electromagnetic interference, compass issues, or improper calibration. Restarting the drone, performing calibrations again, and checking the environment before a second flight attempt are mandatory steps. Learning to operate the drone in this mode is a critical skill for any responsible operator, especially in emergency situations.