What is ATTI mode and when is it activated on the DJI Flip?

[AdminForo]

What is ATTI mode and when is it activated on the DJI Flip: ATTI (Attitude) mode on the DJI Flip is a flight mode that is automatically activated when the vision systems are not available or when the GNSS signal is weak or the compass experiences interference. In this mode, the drone cannot automatically maintain its position, which means that it is more susceptible to the effects of wind and other environmental factors. For this reason, the operator must maintain constant control of the drone to avoid unwanted drift or crashes.

This mode is useful in specific situations, such as indoor flights where the GNSS signal is not available or in environments where the use of vision sensors may be limited, such as areas with reflective surfaces or poor lighting. However, ATTI mode also increases flight risks, as the drone cannot perform automatic maneuvers such as braking or hovering, which requires greater skill and attention from the operator.

In terms of safety, it is essential to avoid flying in ATTI mode near obstacles or in adverse weather conditions, as the drone may drift horizontally due to wind. Operators should be prepared to land the drone as soon as possible if conditions become too difficult to handle. Additionally, it is recommended to pre-set the return-to-home mode to minimize risks in the event of loss of control.

ATTI mode is an advanced feature that, while presenting challenges, also offers opportunities for creative flights in controlled environments. It is a valuable tool for experienced operators who wish to explore the capabilities of the DJI Flip in unique circumstances, but should always be used with caution and proper preparation.